As some will know ive just bought a Harrows re pointer from DARTS CORNER , Well its here so here goes

Picture 1
The re pointer comes in a sturdy plastic case about the same size as those horrible plastic cases you get with new darts

[You must be registered and logged in to see this image.]

Picture 2
Inside the case is the re pointer 2 allen keys and instructions

[You must be registered and logged in to see this image.]

Pictures 3 / 4 / 5
Well this is how it works , Simply screw the barrel on , release the 2 allen screws at the bottom , Using the butterfly nut wind the barrel down so the barrel nearly touches the clamp, Tighten the clamp allen screws then raise the barrel leaving the point in the clamp

[You must be registered and logged in to see this image.]

[u]VERDICT[u]

Overpriced for what it is really but well made on the whole , It seems to do the job well enough .

GRIPES

Who in gods name thought it would ne a good idea to put a butterfly nut at the top ?????
Near impossible to turn when pointing / removing point , Solution , well its going down the workshop to have a brief discussion with a grinder and a welder , I am going to replace the butterfly with a standard nut , Much easier to just use a spanner,

Overall not a bad bit of kit but for around £50 it should be perfect !!!!

Nice review - and I agree on the butterfly nut at the top. I use a wrench on mine lol

I used to wreck my hand with the butterfly nut on tight barrels!