I order this a few weeks ago and have just gotten around to installing it.
The package arrived in a padded envelope.
This is what the package contained.
[You must be registered and logged in to see this image.]Installation:
This hanging unit is a piece of cake to mount.
First I removed my old bracket.
Then I secured the back part of the bracket to my back board and checked the height.
[You must be registered and logged in to see this image.]Then put in the 4 screws provided and removed the center screw that I used to hold it in place while I drilled pilot holes in the four mounting holes.
[You must be registered and logged in to see this image.]Then I took the screw out of the back of my board. Using this screw, I positioned the other half of the bracket and drilled pilot holes.
[You must be registered and logged in to see this image.]Then screwed in the 3 screws provided and that was it. Job done.
[You must be registered and logged in to see this image.]Total time taken was around 10 minutes.
The only thing I have noticed with this bracket is that the board sits a bit further off of my back board and I needed to chock it up a little so the board doesnt wobble.
All in all, this is a pretty good mounting bracket and at $2.50 US from Darts Warehouse, it is a worth while investment.